The process of weighing 100 tons of unmanned weighbridge is as follows:

Before preparing for weighing, ensure that the indicator light is green and the gate is closed.

When the weighing vehicle reaches the front of the scale, the gate will automatically lift the railing, and after entering the scale, the gate will automatically close.

The vehicle stops after boarding the unmanned weighing scale, ensuring that it is completely within the range of the front and rear photoelectric switches.

The driver takes out the IC card they carry and swipes it.

The unmanned weighing system will automatically read the gross weight of the vehicle based on the vehicle information, and the monitoring equipment equipped on the weighing scale will automatically recognize the license plate information through image capture. The captured images can be automatically integrated with the weighing documents and saved to the system database.

When the weighing vehicle stops moving, a voice announcement will be automatically played to remind the driver that the weighing has started.

After detecting vehicle data, the system computer automatically records and saves it.

Simultaneously captured through monitoring equipment, the specific number of images mainly depends on the number of cameras.

After the weighing record is completed in the central control room, the gate will automatically open. When the vehicle fully passes through the weighing range, the gate will automatically close and the indicator light will change from red to green.

The above information is for reference only. The specific process of a 100 ton unmanned weighing scale may vary depending on the weighing scale system or equipment. If necessary, you can consult Qingdao Simi Weighing Instrument for specific procedures.100 ton unmanned weighbridge